WashU engineers discover lead-free perovskite semiconductor for solar cells using data analytics, supercomputers
Atomic model of KBaTeBiO6 (left). A scanning transmission electron micrograph showing the atomic structure of KBaTeBiO6, along with snapshot of the synthesized powder.
Solar panel installations are on the rise in the U.S., with more than 2 million new installations in early 2019, the most ever recorded in a first quarter, according to a recent report by Solar Energy Industries Association and Wood Mackenzie Power & Renewables.
To meet the ever-increasing demands, low-cost and more efficient alternatives to silicon-based solar cells — currently the most widely used technology — are desirable. In the past decade, lead-halide perovskites have surged as the most promising class of alternative materials; however, they are unstable. They contain lead, which is toxic and poses potential health and environmental hazards such as ground water contamination.
A team of engineers at Washington University in St. Louis has found what they believe is a more stable, less toxic semiconductor for solar applications using a novel double perovskite oxide discovered through data analytics and quantum-mechanical calculations.
The work was published online June 11 in Chemistry of Materials.
Rohan Mishra, assistant professor of mechanical engineering & materials science in the McKelvey School of Engineering, led an interdisciplinary, international team that discovered the new semiconductor, made up of potassium, barium, tellurium, bismuth and oxygen (KBaTeBiO6). The lead-free double perovskite oxide was one of an initial 30,000 potential bismuth-based oxides. Of those 30,000, only about 25 were known compounds.
Using materials informatics and quantum mechanical calculations on one of the fastest supercomputers in the world, Arashdeep Singh Thind, a doctoral student in Mishra's lab who is based at Oak Ridge National Laboratory, found KBaTeBiO6 to be the most promising out of the 30,000 potential oxides.
"We found that this looked to be the most stable compound and that it could be synthesized in the lab," Mishra said. "More importantly, whereas most oxides tend to have a large band, we predicted the new compound to have a lower band gap, which is close to the halide perovskites, and to have reasonably good properties."
The band gap is the energy barrier that electrons must overcome to form free carriers that, in the context of a solar cell, can be extracted to power an electrical device or stored in a battery for later use. The energy to overcome this barrier is provided by sunlight. The most promising compounds for solar cell applications have a band gap of about 1.5 eV, or electronvolt, Mishra said.
Mishra discussed the possibility of synthesizing KBaTeBiO6 with Pratim Biswas, assistant vice chancellor, the Lucy & Stanley Lopata Professor and chair of the Department of Energy, Environmental & Chemical Engineering. Shalinee Kavadiya, then a McKelvey Engineering doctoral student and now a postdoctoral research associate at Arizona State University, got to work on perfecting the recipe.
"Shalinee spent about six months synthesizing the material," Mishra said. "Once she was able to synthesize it, as we had predicted, it was stable and had a band gap of 1.88 eV, which we also predicted."
Mishra said these are first-generation solar cells that need more fine tuning of the band gap, but it is a good first step toward nontoxic solar cells.
"This shows that we can go away from these lead-halide perovskites," Mishra said. "This opens up a really big space for designing semiconductors not just for solar cell applications but also for other semiconductor applications, such as LCD displays."
Next, the team will study the role of any defects in this new semiconductor and look to more advanced synthesis techniques, including using aerosol techniques.
The McKelvey School of Engineering at Washington University in St. Louis focuses intellectual efforts through a new convergence paradigm and builds on strengths, particularly as applied to medicine and health, energy and environment, entrepreneurship and security. With 96.5 tenured/tenure-track and 33 additional full-time faculty, 1,300 undergraduate students, 1,200 graduate students and 20,000 alumni, we are working to leverage our partnerships with academic and industry partners — across disciplines and across the world — to contribute to solving the greatest global challenges of the 21st century.
Thind AS, Kavadiya S, Kouhnavard M, Wheelus R, Cho SB, Lin L-Y, Kacica C, Mulmudi HK, Unoici KA, Borisevic AY, Pilania G, Biswas P, Mishra R. KBaTeBiO6: A lead-free, inorganic double-perovskite semiconductor for photovoltaic applications. Chemistry of Materials, published online June 11, 2019. https://doi.org/10.1021/acs.chemmater.9b01025
Funding for this work was provided by the National Science Foundation (1806147) and the Ralph E. Powe Junior Faculty Enhancement Award from the Oak Ridge Associated Universities.